Comparison · Air dryers
Great Lakes Air air dryers
3 refrigerated, desiccant lines (non-cycling, blower purge, heated purge), from the manufacturer’s brochures.
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
All manufacturers Search by need (refrigerated)Search by need (desiccant)
GRN
- Flow
- 10 to 3,000 SCFM (≈ 17 to 5,097 m³/h)at the manufacturer’s reference conditions
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Frequency
- 60 Hz
- Voltages
- 115/120-1-60 (+ three-phase)
- CSA · CRN
- yes (CSA C22.2 No. 236-15) · n/a
- Sources
- Manufacturer’s page
Models
All models: Type Non-cyclingDew point 3.9 to 10 °C (39 to 50 °F)ISO class Class 5 to 6 (derived)
| Model | Flow | Voltage |
|---|---|---|
| GRN-10A-t | 10 SCFM≈ 17 m³/h | 115-1-60 |
| GRN-20A-t | 20 SCFM≈ 34 m³/h | 115-1-60 |
| GRN-25A-t | 25 SCFM≈ 42 m³/h | 115-1-60 |
| GRN-40A-t | 40 SCFM≈ 68 m³/h | 115-1-60 |
| GRN-50A-t | 50 SCFM≈ 85 m³/h | 115-1-60 |
| GRN-75A-t | 75 SCFM≈ 127 m³/h | 115-1-60 |
| GRN-100A-t | 100 SCFM≈ 170 m³/h | 115-1-60 |
| GRN-125A-t | 125 SCFM≈ 212 m³/h | 115-1-60; 230-1-60 |
| GRN-150A-t | 150 SCFM≈ 255 m³/h | 115-1-60; 230-1-60 |
| GRN-200A-t | 200 SCFM≈ 340 m³/h | 115-1-60; 230-1-60 |
| GRN-250A-t | 250 SCFM≈ 425 m³/h | 230-1-60 |
| GRN-250A-t (3-ph) | 250 SCFM≈ 425 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-300A-t | 300 SCFM≈ 510 m³/h | 230-1-60 |
| GRN-300A-t (3-ph) | 300 SCFM≈ 510 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-400A-t (3-ph) | 400 SCFM≈ 680 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-500A-t (3-ph) | 500 SCFM≈ 850 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-650A-t (3-ph) | 650 SCFM≈ 1,104 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-800A-t (3-ph) | 800 SCFM≈ 1,359 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-1000A-t (3-ph) | 1,000 SCFM≈ 1,699 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-1200A-t (3-ph) | 1,200 SCFM≈ 2,039 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-1500A-t (3-ph) | 1,500 SCFM≈ 2,549 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-1750A-t (3-ph) | 1,750 SCFM≈ 2,973 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-2000A-t (3-ph) | 2,000 SCFM≈ 3,398 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-2250A-t (3-ph) | 2,250 SCFM≈ 3,823 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-2500A-t (3-ph) | 2,500 SCFM≈ 4,248 m³/h | 460-3-60; 230-3-60; 575-3-60 |
| GRN-3000A-t (3-ph) | 3,000 SCFM≈ 5,097 m³/h | 460-3-60; 230-3-60; 575-3-60 |
Comparable lines (8)
- Mattei MNC
- Atlas Copco FX 1-21
- MARK MDX 400-84000
- Aircel VF / DHT
- Altec AIR RAD / RHT / UA / DX
- ALUP ADQ 21-7200
- Worthington Creyssensac DW 2-720
- BEKO Technologies DRYPOINT RA III
Same type, overlapping flows, equal or better ISO class. Published facts, no ranking.
GBS
- Flow
- 100 to 6,000 SCFM (≈ 170 to 10,194 m³/h)at the manufacturer’s reference conditions
- Dew point
- -40 °C (-40 °F)-40 (stable in external/combined mode; varies with season in blower-only mode)
- ISO 8573-1 class
- Class 2 (derived)
- Frequency
- n/a
- Voltages
- n/a
- CSA · CRN
- UL 508A (panel) · n/a
- Sources
- Manufacturer’s page
Models
All models: Type Blower purgeDew point -40 °C (-40 °F)ISO class Class 2 (derived)
| Model | Flow |
|---|---|
| GBS-100-t | 100 SCFM≈ 170 m³/h |
| GBS-125-t | 125 SCFM≈ 212 m³/h |
| GBS-175-t | 175 SCFM≈ 297 m³/h |
| GBS-250-t | 250 SCFM≈ 425 m³/h |
| GBS-350-t | 350 SCFM≈ 595 m³/h |
| GBS-500-t | 500 SCFM≈ 850 m³/h |
| GBS-650-t | 650 SCFM≈ 1,104 m³/h |
| GBS-800-t | 800 SCFM≈ 1,359 m³/h |
| GBS-1000-t | 1,000 SCFM≈ 1,699 m³/h |
| GBS-1250-t | 1,250 SCFM≈ 2,124 m³/h |
| GBS-1400-t | 1,400 SCFM≈ 2,379 m³/h |
| GBS-1600-t | 1,600 SCFM≈ 2,718 m³/h |
| GBS-1800-t | 1,800 SCFM≈ 3,058 m³/h |
| GBS-2000-t | 2,000 SCFM≈ 3,398 m³/h |
| GBS-2250-t | 2,250 SCFM≈ 3,823 m³/h |
| GBS-2500-t | 2,500 SCFM≈ 4,248 m³/h |
| GBS-2750-t | 2,750 SCFM≈ 4,672 m³/h |
| GBS-3000-t | 3,000 SCFM≈ 5,097 m³/h |
| GBS-3500-t | 3,500 SCFM≈ 5,947 m³/h |
| GBS-4000-t | 4,000 SCFM≈ 6,796 m³/h |
| GBS-5000-t | 5,000 SCFM≈ 8,495 m³/h |
| GBS-6000-t | 6,000 SCFM≈ 10,194 m³/h |
Comparable lines (8)
- Altec AIR HBP
- Quincy QBP
- BEKO Technologies EVERDRY FRL-V
- Champion XCHB
- Gardner Denver GBPD
- Ingersoll Rand HB
- Atlas Copco BD+
- Atlas Copco BD+ ZP
Same type, overlapping flows, equal or better ISO class. Published facts, no ranking.
GEH
- Flow
- 100 to 6,000 SCFM (≈ 170 to 10,194 m³/h)at the manufacturer’s reference conditions
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Frequency
- n/a
- Voltages
- n/a
- CSA · CRN
- UL 508A (panel) · n/a
- Sources
- Manufacturer’s page
Models
All models: Type Heated purge
| Model | Flow |
|---|---|
| GEH-100-t | 100 SCFM≈ 170 m³/h |
| GEH-125-t | 125 SCFM≈ 212 m³/h |
| GEH-175-t | 175 SCFM≈ 297 m³/h |
| GEH-250-t | 250 SCFM≈ 425 m³/h |
| GEH-350-t | 350 SCFM≈ 595 m³/h |
| GEH-500-t | 500 SCFM≈ 850 m³/h |
| GEH-650-t | 650 SCFM≈ 1,104 m³/h |
| GEH-800-t | 800 SCFM≈ 1,359 m³/h |
| GEH-1000-t | 1,000 SCFM≈ 1,699 m³/h |
| GEH-1250-t | 1,250 SCFM≈ 2,124 m³/h |
| GEH-1400-t | 1,400 SCFM≈ 2,379 m³/h |
| GEH-1600-t | 1,600 SCFM≈ 2,718 m³/h |
| GEH-1800-t | 1,800 SCFM≈ 3,058 m³/h |
| GEH-2000-t | 2,000 SCFM≈ 3,398 m³/h |
| GEH-2250-t | 2,250 SCFM≈ 3,823 m³/h |
| GEH-2500-t | 2,500 SCFM≈ 4,248 m³/h |
| GEH-2750-t | 2,750 SCFM≈ 4,672 m³/h |
| GEH-3000-t | 3,000 SCFM≈ 5,097 m³/h |
| GEH-3500-t | 3,500 SCFM≈ 5,947 m³/h |
| GEH-4000-t | 4,000 SCFM≈ 6,796 m³/h |
| GEH-5000-t | 5,000 SCFM≈ 8,495 m³/h |
| GEH-6000-t | 6,000 SCFM≈ 10,194 m³/h |
Comparable lines (8)
- Altec AIR HRE
- Mattei MEH
- Champion XCHP
- Deltech RP
- Nano Purification D5 EH (US)
- Hankison HPD
- Kaeser KED
- MTA DryXtreme NST
Same type, overlapping flows, equal or better ISO class. Published facts, no ranking.
Equivalent equipment at Onyx M3
Purestream (Friulair) refrigerated dryers, distributed by Onyx M3 Inc.
Is your product missing?
Request received. We will proceed within 72 hours.