Lubricated rotary screw compressor
Sullair LS160
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,070 cfm100 psig (≈ 6.9 bar)
- Power
- 200 hp160 kW
- Type
- Fixed speed
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,070 cfm | ≈ 30.3 m³/min |
| 110 psig (≈ 7.6 bar) | 1,025 cfm | ≈ 29.02 m³/min |
| 125 psig (≈ 8.6 bar) | 985 cfm | ≈ 27.89 m³/min |
| 150 psig (≈ 10.3 bar) | 875 cfm | ≈ 24.78 m³/min |
| 200 psig (≈ 13.8 bar) | 730 cfm | ≈ 20.67 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser DSDX 305 | ≈ 1,066.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 214 hp | Worldwide |
| ELGi EG 160P | 1,088 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 1,038.9 acfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Atlas Copco GA 160 | 1,121 cfm | 100 psig (≈ 6.9 bar) | 215 hp | Worldwide |
| Gardner Denver L160 | 1,128.5 acfm | 110 psig (≈ 7.6 bar) | 215 hp | Worldwide |
| ALUP LARGO 200 | 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.