Lubricated rotary screw compressor
Atlas Copco GA 160
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,121 cfm100 psig (≈ 6.9 bar)
- Power
- 215 hp160 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA 90+-160
- Stages
- n/a
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,121 cfm | ≈ 31.74 m³/min |
| 125 psig (≈ 8.6 bar) | 1,017 cfm | ≈ 28.8 m³/min |
| 150 psig (≈ 10.3 bar) | 930 cfm | ≈ 26.33 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | 1,112 cfm | ≈ 31.49 m³/min |
| 8 bar (≈ 116 psig) | 1,049 cfm | ≈ 29.7 m³/min |
| 9.5 bar (≈ 138 psig) | 975 cfm | ≈ 27.61 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Gardner Denver L160 | 1,128.5 acfm | 110 psig (≈ 7.6 bar) | 215 hp | Worldwide |
| ELGi EG 160SP | 1,130 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Kaeser DSDX 305 | ≈ 1,066.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 214 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 1,038.9 acfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Sullair LS160 (CE) | ≈ 1,147.7 cfm | 7 bar (≈ 102 psig) | ≈ 214 hp | Europe / international |
| ALUP LARGO 200 | 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 90+-160 models
Is your product missing?
Request received. We will proceed within 72 hours.