Lubricated rotary screw compressor
Gardner Denver L160
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,128.5 acfm110 psig (≈ 7.6 bar)
- Power
- 215 hp160 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,128.5 acfm | ≈ 31.96 m³/min |
| 145 psig (≈ 10 bar) | 843.1 acfm | ≈ 23.87 m³/min |
| 190 psig (≈ 13.1 bar) | 819.5 acfm | ≈ 23.21 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,131.5 acfm | ≈ 32.04 m³/min |
| 145 psig (≈ 10 bar) | 995.9 acfm | ≈ 28.2 m³/min |
| 190 psig (≈ 13.1 bar) | 844.4 acfm | ≈ 23.91 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Sullivan-Palatek SP25-250 | 1,133.3 acfm | 125 psig (≈ 8.6 bar) | 250 hp | North America |
| Atlas Copco GA 180 | 1,137 cfm | 125 psig (≈ 8.6 bar) | ≈ 241 hp | Worldwide |
| ELGi EG 160SP | 1,080 cfm | 8 bar (≈ 116 psig) | 200 hp | Worldwide |
| Kaeser DSD 250 | 1,075 cfm | 125 psig (≈ 8.6 bar) | n/a | North America |
| ALUP LARGO 200 | 1,170 cfm | 8 bar (≈ 116 psig) | 270 hp | Europe / international |
| Sullair LS160 (CE) | ≈ 1,077.1 cfm | 8 bar (≈ 116 psig) | ≈ 214 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.