Lubricated rotary screw compressor
Gardner Denver L200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,338 acfm110 psig (≈ 7.6 bar)
- Power
- 270 hp200 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,338 acfm | ≈ 37.89 m³/min |
| 145 psig (≈ 10 bar) | 1,035.2 acfm | ≈ 29.31 m³/min |
| 190 psig (≈ 13.1 bar) | 1,010.1 acfm | ≈ 28.6 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,385.4 acfm | ≈ 39.23 m³/min |
| 145 psig (≈ 10 bar) | 1,230.7 acfm | ≈ 34.85 m³/min |
| 190 psig (≈ 13.1 bar) | 1,037.5 acfm | ≈ 29.38 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser ESD 375 | ≈ 1,336.7 cfm | 7.5 bar (≈ 109 psig) | ≈ 268 hp | Worldwide |
| Sullair LS190 | 1,300 cfm | 110 psig (≈ 7.6 bar) | 250 hp | North America |
| Sullivan-Palatek SP25-350 | 1,380.2 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| Atlas Copco GA 200 | 1,398 cfm | 125 psig (≈ 8.6 bar) | ≈ 295 hp | Worldwide |
| ELGi EG 200 | 1,218 cfm | 8 bar (≈ 116 psig) | 250 hp | Worldwide |
| ALUP LARGO 201 | 1,297 cfm | 8 bar (≈ 116 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.