Lubricated rotary screw compressor
Sullivan-Palatek SP25-350
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,540.3 acfm100 psig (≈ 6.9 bar)
- Power
- 350 hp≈ 261.1 kW
- Type
- Fixed speed
- Manufacturer
- Sullivan-Palatek
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- optional « ASME and CRN »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,540.3 acfm | ≈ 43.62 m³/min |
| 125 psig (≈ 8.6 bar) | 1,380.2 acfm | ≈ 39.08 m³/min |
| 150 psig (≈ 10.3 bar) | 1,252.9 acfm | ≈ 35.48 m³/min |
| 175 psig (≈ 12.1 bar) | 1,115.8 acfm | ≈ 31.6 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 250 Xtreme | 1,543.2 cfm | 7 bar (≈ 102 psig) | 335 hp | Worldwide |
| ELGi EG 250 | 1,525 cfm | 7 bar (≈ 102 psig) | 300 hp | Worldwide |
| Kaeser ESD 445 | ≈ 1,490.3 cfm | 7.5 bar (≈ 109 psig) | ≈ 335 hp | Worldwide |
| Gardner Denver L250 | 1,464.3 acfm | 110 psig (≈ 7.6 bar) | 340 hp | Worldwide |
| Sullair LS220 | 1,620 cfm | 100 psig (≈ 6.9 bar) | 300 hp | North America |
| ALUP LARGO 250 | 1,466 cfm | 7 bar (≈ 102 psig) | 340 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SP25 Series 200-350 hp models
Is your product missing?
Request received. We will proceed within 72 hours.