Lubricated rotary screw compressor
Sullivan-Palatek SP25-200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,038.9 acfm100 psig (≈ 6.9 bar)
- Power
- 200 hp≈ 149.2 kW
- Type
- Fixed speed
- Manufacturer
- Sullivan-Palatek
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- optional « ASME and CRN »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,038.9 acfm | ≈ 29.42 m³/min |
| 125 psig (≈ 8.6 bar) | 933.8 acfm | ≈ 26.44 m³/min |
| 150 psig (≈ 10.3 bar) | 835.9 acfm | ≈ 23.67 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 160 | 1,026 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Kaeser DSDX 305 | ≈ 1,066.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 214 hp | Worldwide |
| Atlas Copco GA 160 Xtreme | 1,010 cfm | 7 bar (≈ 102 psig) | 215 hp | Worldwide |
| Sullair LS160 | 1,070 cfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Gardner Denver L160 | 1,128.5 acfm | 110 psig (≈ 7.6 bar) | 215 hp | Worldwide |
| ALUP LARGO 200 | 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SP25 Series 200-350 hp models
Is your product missing?
Request received. We will proceed within 72 hours.