Lubricated rotary screw compressor
Atlas Copco GA 160 Xtreme
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,010 cfm7 bar (≈ 102 psig)
- Power
- 215 hp160 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Stages
- n/a
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | 1,010 cfm | ≈ 28.6 m³/min |
| 8.5 bar (≈ 123 psig) | 928.7 cfm | ≈ 26.3 m³/min |
| 10 bar (≈ 145 psig) | 847.5 cfm | ≈ 24 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 160 | 1,026 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 1,038.9 acfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Kaeser DSDX 305 | ≈ 1,066.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 214 hp | Worldwide |
| Gardner Denver L160 | 1,128.5 acfm | 110 psig (≈ 7.6 bar) | 215 hp | Worldwide |
| Sullair LS132 (CE) | ≈ 960.6 cfm | 7 bar (≈ 102 psig) | ≈ 177 hp | Europe / international |
| ALUP LARGO 200 | 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 160-250 Xtreme models
Is your product missing?
Request received. We will proceed within 72 hours.