Lubricated rotary screw compressor
Atlas Copco GA 250 Xtreme
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,543.2 cfm7 bar (≈ 102 psig)
- Power
- 335 hp250 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Stages
- n/a
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | 1,543.2 cfm | ≈ 43.7 m³/min |
| 8.5 bar (≈ 123 psig) | 1,490.2 cfm | ≈ 42.2 m³/min |
| 10 bar (≈ 145 psig) | 1,306.6 cfm | ≈ 37 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Sullivan-Palatek SP25-350 | 1,540.3 acfm | 100 psig (≈ 6.9 bar) | 350 hp | North America |
| ELGi EG 250 | 1,525 cfm | 7 bar (≈ 102 psig) | 300 hp | Worldwide |
| Kaeser ESD 445 | ≈ 1,490.3 cfm | 7.5 bar (≈ 109 psig) | ≈ 335 hp | Worldwide |
| Gardner Denver L290 | 1,616.7 acfm | 110 psig (≈ 7.6 bar) | 390 hp | Worldwide |
| Sullair LS220 | 1,620 cfm | 100 psig (≈ 6.9 bar) | 300 hp | North America |
| ALUP LARGO 250 | 1,466 cfm | 7 bar (≈ 102 psig) | 340 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 160-250 Xtreme models
Is your product missing?
Request received. We will proceed within 72 hours.