Lubricated rotary screw compressor
Sullair LS220
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,620 cfm100 psig (≈ 6.9 bar)
- Power
- 300 hp220 kW
- Type
- Fixed speed
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,620 cfm | ≈ 45.87 m³/min |
| 110 psig (≈ 7.6 bar) | 1,530 cfm | ≈ 43.32 m³/min |
| 125 psig (≈ 8.6 bar) | 1,440 cfm | ≈ 40.78 m³/min |
| 150 psig (≈ 10.3 bar) | 1,285 cfm | ≈ 36.39 m³/min |
| 200 psig (≈ 13.8 bar) | 1,150 cfm | ≈ 32.56 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Gardner Denver L290 | 1,616.7 acfm | 110 psig (≈ 7.6 bar) | 390 hp | Worldwide |
| Atlas Copco GA 200 | 1,564 cfm | 100 psig (≈ 6.9 bar) | ≈ 295 hp | Worldwide |
| Sullivan-Palatek SP25-350 | 1,540.3 acfm | 100 psig (≈ 6.9 bar) | 350 hp | North America |
| Kaeser FSD 475 | ≈ 1,702.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 335 hp | Worldwide |
| ELGi EG 250 | 1,525 cfm | 7 bar (≈ 102 psig) | 300 hp | Worldwide |
| ALUP LARGO 251 | 1,627 cfm | 7 bar (≈ 102 psig) | 340 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.