Lubricated rotary screw compressor
Sullair LS160V
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,070 cfm100 psig (≈ 6.9 bar)
- Power
- 200 hp160 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,070 cfm | ≈ 30.3 m³/min |
| 110 psig (≈ 7.6 bar) | 1,025 cfm | ≈ 29.02 m³/min |
| 125 psig (≈ 8.6 bar) | 985 cfm | ≈ 27.89 m³/min |
| 150 psig (≈ 10.3 bar) | 869 cfm | ≈ 24.61 m³/min |
| 200 psig (≈ 13.8 bar) | 730 cfm | ≈ 20.67 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 160P (VSD) | 449 to 1,088 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Kaeser SFC 132 | 1,016 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
| Atlas Copco GA 132 VSD+ 8.5 bar (125 psi) | 214 to 987 cfm | 100 psig (≈ 6.9 bar) | 175 hp | Worldwide |
| Sullivan-Palatek SP25-250 VFD | 1,267.7 acfm | 100 psig (≈ 6.9 bar) | 250 hp | North America |
| FINI K-MAX TS 132-07 VS | 326 to 989 cfm | 7 bar (≈ 102 psig) | ≈ 177 hp | Europe / international |
| ALUP ALLEGRO 200 | 362 to 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.