Lubricated rotary screw compressor
Sullair LS110
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 763 cfm110 psig (≈ 7.6 bar)
- Power
- 150 hp110 kW
- Type
- Fixed speed
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 763 cfm | ≈ 21.61 m³/min |
| 125 psig (≈ 8.6 bar) | 702 cfm | ≈ 19.88 m³/min |
| 150 psig (≈ 10.3 bar) | 622 cfm | ≈ 17.61 m³/min |
| 175 psig (≈ 12.1 bar) | 568 cfm | ≈ 16.08 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Gardner Denver L110 | 759.3 acfm | 110 psig (≈ 7.6 bar) | 150 hp | Worldwide |
| Kaeser DSD 205 | ≈ 741.6 cfm | 7.5 bar (≈ 109 psig) | ≈ 147 hp | Worldwide |
| ELGi EG 132 | 791 cfm | 8 bar (≈ 116 psig) | 175 hp | Worldwide |
| Atlas Copco GA 110 | 706 cfm | 125 psig (≈ 8.6 bar) | 150 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 933.8 acfm | 125 psig (≈ 8.6 bar) | 200 hp | North America |
| Chicago Pneumatic CPI120 | 574 cfm | 8 bar (≈ 116 psig) | 120 hp | North America |
| ALUP LARGO 110 | ≈ 652.6 cfm | 8 bar (≈ 116 psig) | 150 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.