Lubricated rotary screw compressor
Sullair LS260V
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,875 cfm100 psig (≈ 6.9 bar)
- Power
- 350 hp260 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,875 cfm | ≈ 53.09 m³/min |
| 110 psig (≈ 7.6 bar) | 1,800 cfm | ≈ 50.97 m³/min |
| 125 psig (≈ 8.6 bar) | 1,660 cfm | ≈ 47.01 m³/min |
| 150 psig (≈ 10.3 bar) | 1,500 cfm | ≈ 42.48 m³/min |
| 200 psig (≈ 13.8 bar) | 1,300 cfm | ≈ 36.81 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 250 VSD Hybrid | ≈ 533.3 to 1,896.4 cfm | 100 psig (≈ 6.9 bar) | ≈ 362 hp | Worldwide |
| Kaeser SFC 315S | 1,825 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
| Sullivan-Palatek SP25-350 VFD | 1,535.6 acfm | 100 psig (≈ 6.9 bar) | 350 hp | North America |
| ELGi EG 250 (VSD) | 642 to 1,525 cfm | 7 bar (≈ 102 psig) | 300 hp | Worldwide |
| FINI K-MAX TS 250-07 VS | 623 to 1,889 cfm | 7 bar (≈ 102 psig) | ≈ 335 hp | Europe / international |
| ALUP ALLEGRO 315 | 555 to 1,848 cfm | 7 bar (≈ 102 psig) | 420 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.