Lubricated rotary screw compressor

Atlas Copco GA 250 VSD Hybrid

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 533.3 to 1,896.4 cfm100 psig (≈ 6.9 bar)
Power: ≈ 362 hp270 kW
Type: Variable speed (VSD)
Manufacturer: Atlas Copco
Line: GA 180-315
Stages: 1
Cooling: Air, or water depending on version
Voltage: n/a
Frequency: 50 Hz · 60 Hz
Brochure market: Worldwide
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

60 Hz

Pressure	Flow	In m³/min
100 psig (≈ 6.9 bar)	≈ 533.3 to 1,896.4 cfm	≈ 15.1 to 53.7 m³/min
125 psig (≈ 8.6 bar)	≈ 614.5 to 1,652.7 cfm	≈ 17.4 to 46.8 m³/min
150 psig (≈ 10.3 bar)	≈ 508.5 to 1,543.3 cfm	≈ 14.4 to 43.7 m³/min

50 Hz

Pressure	Flow	In m³/min
7.5 bar (≈ 109 psig)	≈ 575.6 to 2,027.1 cfm	≈ 16.3 to 57.4 m³/min
8.5 bar (≈ 123 psig)	≈ 554.4 to 1,864.6 cfm	≈ 15.7 to 52.8 m³/min
10 bar (≈ 145 psig)	≈ 462.6 to 1,783.4 cfm	≈ 13.1 to 50.5 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair LS260V	1,875 cfm	100 psig (≈ 6.9 bar)	350 hp	North America
Kaeser SFC 315S	1,825 cfm	110 psig (≈ 7.6 bar)	n/a	North America
Sullivan-Palatek SP25-350 VFD	1,535.6 acfm	100 psig (≈ 6.9 bar)	350 hp	North America
ELGi EG 250 (VSD)	642 to 1,525 cfm	7 bar (≈ 102 psig)	300 hp	Worldwide
FINI K-MAX TS 250-07 VS	623 to 1,889 cfm	7 bar (≈ 102 psig)	≈ 335 hp	Europe / international
ALUP ALLEGRO 315	555 to 1,848 cfm	7 bar (≈ 102 psig)	420 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other GA 180-315 models

Is your product missing?