Lubricated rotary screw compressor

Atlas Copco GA 250

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 1,868 cfm100 psig (≈ 6.9 bar)
Power: ≈ 354 hp264 kW
Type: Fixed speed
Manufacturer: Atlas Copco
Line: GA 180-315
Stages: 1
Cooling: Air, or water depending on version
Voltage: n/a
Frequency: 50 Hz · 60 Hz
Brochure market: Worldwide
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

60 Hz

Pressure	Flow	In m³/min
75 psig (≈ 5.2 bar)	2,106 cfm	≈ 59.64 m³/min
100 psig (≈ 6.9 bar)	1,868 cfm	≈ 52.9 m³/min
125 psig (≈ 8.6 bar)	1,677 cfm	≈ 47.49 m³/min
150 psig (≈ 10.3 bar)	1,480 cfm	≈ 41.91 m³/min

50 Hz

Pressure	Flow	In m³/min
5.5 bar (≈ 80 psig)	≈ 2,097.7 cfm	≈ 59.4 m³/min
7.5 bar (≈ 109 psig)	≈ 1,843.4 cfm	≈ 52.2 m³/min
8.5 bar (≈ 123 psig)	≈ 1,730.4 cfm	≈ 49 m³/min
10 bar (≈ 145 psig)	≈ 1,596.2 cfm	≈ 45.2 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair LS260	1,875 cfm	100 psig (≈ 6.9 bar)	350 hp	North America
Kaeser FSD 475	≈ 1,702.2 cfm	7.5 bar (≈ 109 psig)	≈ 335 hp	Worldwide
Gardner Denver L290	1,616.7 acfm	110 psig (≈ 7.6 bar)	390 hp	Worldwide
Sullivan-Palatek SP25-350	1,540.3 acfm	100 psig (≈ 6.9 bar)	350 hp	North America
ELGi EG 250	1,525 cfm	7 bar (≈ 102 psig)	300 hp	Worldwide
ALUP LARGO 315	1,848 cfm	7 bar (≈ 102 psig)	420 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other GA 180-315 models

Is your product missing?