Lubricated rotary screw compressor
Atlas Copco GA 200 VSD Hybrid
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 501.5 to 2,267.2 cfm100 psig (≈ 6.9 bar)
- Power
- ≈ 298 hp222 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Atlas Copco
- Line
- GA 180-315
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | ≈ 501.5 to 2,267.2 cfm | ≈ 14.2 to 64.2 m³/min |
| 125 psig (≈ 8.6 bar) | ≈ 462.6 to 1,945.8 cfm | ≈ 13.1 to 55.1 m³/min |
| 150 psig (≈ 10.3 bar) | ≈ 473.2 to 1,829.3 cfm | ≈ 13.4 to 51.8 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 7.5 bar (≈ 109 psig) | ≈ 540.3 to 1,726.9 cfm | ≈ 15.3 to 48.9 m³/min |
| 8.5 bar (≈ 123 psig) | ≈ 526.2 to 1,596.2 cfm | ≈ 14.9 to 45.2 m³/min |
| 10 bar (≈ 145 psig) | ≈ 437.9 to 1,497.3 cfm | ≈ 12.4 to 42.4 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser HSD 662 SFC | ≈ 367.3 to 2,343.1 cfm | 7.5 bar (≈ 109 psig) | ≈ 512 hp | Worldwide |
| Sullair LS260V | 1,875 cfm | 100 psig (≈ 6.9 bar) | 350 hp | North America |
| FINI K-MAX TS 315-07 VS | 734 to 2,225 cfm | 7 bar (≈ 102 psig) | ≈ 422 hp | Europe / international |
| ALUP ALLEGRO 315 | 555 to 1,848 cfm | 7 bar (≈ 102 psig) | 420 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 180-315 models
Is your product missing?
Request received. We will proceed within 72 hours.