Lubricated rotary screw compressor
Atlas Copco GA 315 VSD+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 414 to 2,116 cfm125 psig (≈ 8.6 bar)
- Power
- ≈ 429 hp320 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Atlas Copco
- Line
- GA 180-315
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 414 to 2,116 cfm | ≈ 11.72 to 59.92 m³/min |
| 150 psig (≈ 10.3 bar) | 399 to 1,919 cfm | ≈ 11.3 to 54.34 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 8.5 bar (≈ 123 psig) | ≈ 416.7 to 2,186 cfm | ≈ 11.8 to 61.9 m³/min |
| 10 bar (≈ 145 psig) | ≈ 402.6 to 2,012.9 cfm | ≈ 11.4 to 57 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SFC 315 | 2,057 cfm | 125 psig (≈ 8.6 bar) | n/a | North America |
| Sullair LS260V | 1,660 cfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| FINI K-MAX TS 315-10 VS | 653 to 1,978 cfm | 10 bar (≈ 145 psig) | ≈ 422 hp | Europe / international |
| ALUP ALLEGRO 315 | 511 to 1,704 cfm | 10 bar (≈ 145 psig) | 420 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 180-315 models
Is your product missing?
Request received. We will proceed within 72 hours.