Lubricated rotary screw compressor
Atlas Copco GA 200 VSD+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 412 to 1,481 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Atlas Copco
- Line
- GA 180-315
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 412 to 1,481 cfm | ≈ 11.67 to 41.94 m³/min |
| 150 psig (≈ 10.3 bar) | 395 to 1,322 cfm | ≈ 11.19 to 37.43 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 8.5 bar (≈ 123 psig) | ≈ 416.7 to 1,536.2 cfm | ≈ 11.8 to 43.5 m³/min |
| 10 bar (≈ 145 psig) | ≈ 399.1 to 1,394.9 cfm | ≈ 11.3 to 39.5 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Sullair LS220V | 1,440 cfm | 125 psig (≈ 8.6 bar) | 300 hp | North America |
| Kaeser SFC 250 | 1,439 cfm | 125 psig (≈ 8.6 bar) | n/a | North America |
| Sullivan-Palatek SP25-350 VFD | 1,380.1 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| ELGi EG 250 (VSD) | 625 to 1,320 cfm | 9.5 bar (≈ 138 psig) | 300 hp | Worldwide |
| ALUP ALLEGRO 251 | 417 to 1,390 cfm | 10 bar (≈ 145 psig) | 340 hp | Europe / international |
| FINI K-MAX TS 250-10 VS | 525 to 1,593 cfm | 10 bar (≈ 145 psig) | ≈ 335 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 180-315 models
Is your product missing?
Request received. We will proceed within 72 hours.