Lubricated rotary screw compressor
Atlas Copco GA 250 VSD+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 414 to 1,769 cfm125 psig (≈ 8.6 bar)
- Power
- ≈ 354 hp264 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Atlas Copco
- Line
- GA 180-315
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 414 to 1,769 cfm | ≈ 11.72 to 50.09 m³/min |
| 150 psig (≈ 10.3 bar) | 398 to 1,590 cfm | ≈ 11.27 to 45.02 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 8.5 bar (≈ 123 psig) | ≈ 416.7 to 1,832.8 cfm | ≈ 11.8 to 51.9 m³/min |
| 10 bar (≈ 145 psig) | ≈ 402.6 to 1,645.7 cfm | ≈ 11.4 to 46.6 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser FSD 575 SFC | ≈ 455.6 to 1,795.8 cfm | 10 bar (≈ 145 psig) | ≈ 422 hp | Worldwide |
| Sullair LS260V | 1,660 cfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| Sullivan-Palatek SP25-350 VFD | 1,380.1 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| ALUP ALLEGRO 315 | 511 to 1,704 cfm | 10 bar (≈ 145 psig) | 420 hp | Europe / international |
| FINI K-MAX TS 250-10 VS | 525 to 1,593 cfm | 10 bar (≈ 145 psig) | ≈ 335 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 180-315 models
Is your product missing?
Request received. We will proceed within 72 hours.