Lubricated rotary screw compressor

Atlas Copco GA 180

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 1,268 cfm100 psig (≈ 6.9 bar)
Power: ≈ 241 hp180 kW
Type: Fixed speed
Manufacturer: Atlas Copco
Line: GA 180-315
Stages: 1
Cooling: Air, or water depending on version
Voltage: n/a
Frequency: 50 Hz · 60 Hz
Brochure market: Worldwide
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

60 Hz

Pressure	Flow	In m³/min
75 psig (≈ 5.2 bar)	1,324 cfm	≈ 37.49 m³/min
100 psig (≈ 6.9 bar)	1,268 cfm	≈ 35.91 m³/min
125 psig (≈ 8.6 bar)	1,137 cfm	≈ 32.2 m³/min
150 psig (≈ 10.3 bar)	1,002 cfm	≈ 28.37 m³/min

50 Hz

Pressure	Flow	In m³/min
5.5 bar (≈ 80 psig)	≈ 1,479.7 cfm	≈ 41.9 m³/min
7.5 bar (≈ 109 psig)	≈ 1,239.5 cfm	≈ 35.1 m³/min
8.5 bar (≈ 123 psig)	≈ 1,186.6 cfm	≈ 33.6 m³/min
10 bar (≈ 145 psig)	≈ 1,070 cfm	≈ 30.3 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullivan-Palatek SP25-250	1,275.2 acfm	100 psig (≈ 6.9 bar)	250 hp	North America
Kaeser ESD 375	≈ 1,336.7 cfm	7.5 bar (≈ 109 psig)	≈ 268 hp	Worldwide
Gardner Denver L200	1,338 acfm	110 psig (≈ 7.6 bar)	270 hp	Worldwide
ELGi EG 200	1,340 cfm	7 bar (≈ 102 psig)	250 hp	Worldwide
Sullair LS190	1,360 cfm	100 psig (≈ 6.9 bar)	250 hp	North America
ALUP LARGO 200	1,210 cfm	7 bar (≈ 102 psig)	270 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other GA 180-315 models

Is your product missing?