Lubricated rotary screw compressor
Sullair LS190V
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,300 cfm100 psig (≈ 6.9 bar)
- Power
- 250 hp190 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,300 cfm | ≈ 36.81 m³/min |
| 110 psig (≈ 7.6 bar) | 1,250 cfm | ≈ 35.4 m³/min |
| 125 psig (≈ 8.6 bar) | 1,200 cfm | ≈ 33.98 m³/min |
| 150 psig (≈ 10.3 bar) | 1,090 cfm | ≈ 30.87 m³/min |
| 200 psig (≈ 13.8 bar) | 950 cfm | ≈ 26.9 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SFC 200 | 1,322 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
| Sullivan-Palatek SP25-250 VFD | 1,267.7 acfm | 100 psig (≈ 6.9 bar) | 250 hp | North America |
| ELGi EG 200 (VSD) | 525 to 1,340 cfm | 7 bar (≈ 102 psig) | 250 hp | Worldwide |
| Atlas Copco GA 160 VSD+ 8.5 bar (125 psi) | 214 to 1,176 cfm | 100 psig (≈ 6.9 bar) | 215 hp | Worldwide |
| FINI K-MAX TS 160-07 VS | 404 to 1,224 cfm | 7 bar (≈ 102 psig) | ≈ 214 hp | Europe / international |
| ALUP ALLEGRO 201 | 415 to 1,384 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.