Lubricated rotary screw compressor

Atlas Copco GA 160 VSD+ 8.5 bar (125 psi)

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 214 to 1,176 cfm100 psig (≈ 6.9 bar)
Power: 215 hp160 kW
Type: Variable speed (VSD)
Manufacturer: Atlas Copco
Line: GA 110-160 VSD+
Stages: n/a
Cooling: Air, or water depending on version
Voltage: n/a
Frequency: 50 Hz · 60 Hz
Brochure market: Worldwide
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

60 Hz

Pressure	Flow	In m³/min
72 psig (≈ 5 bar)	220 to 1,250 cfm	≈ 6.23 to 35.4 m³/min
100 psig (≈ 6.9 bar)	214 to 1,176 cfm	≈ 6.06 to 33.3 m³/min
132 psig (≈ 9.1 bar)	208 to 1,049 cfm	≈ 5.89 to 29.7 m³/min

50 Hz

Pressure	Flow	In m³/min
5 bar (≈ 73 psig)	220 to 1,250 cfm	≈ 6.23 to 35.4 m³/min
7 bar (≈ 102 psig)	214 to 1,168 cfm	≈ 6.06 to 33.07 m³/min
8.5 bar (≈ 123 psig)	212 to 1,083 cfm	≈ 6 to 30.67 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Kaeser SFC 160	1,177 cfm	110 psig (≈ 7.6 bar)	n/a	North America
ELGi EG 160SP (VSD)	452 to 1,130 cfm	7 bar (≈ 102 psig)	200 hp	Worldwide
Sullivan-Palatek SP25-250 VFD	1,267.7 acfm	100 psig (≈ 6.9 bar)	250 hp	North America
FINI K-MAX TS 160-08 VS	385 to 1,165 cfm	8 bar (≈ 116 psig)	≈ 214 hp	Europe / international
Sullair LS160V (CE)	≈ 1,147.7 cfm	7 bar (≈ 102 psig)	≈ 214 hp	Europe / international
ALUP ALLEGRO 200	362 to 1,210 cfm	7 bar (≈ 102 psig)	270 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other GA 110-160 VSD+ models

Is your product missing?