Lubricated rotary screw compressor
Sullair LS160V (CE)
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 1,147.7 cfm7 bar (≈ 102 psig)
- Power
- ≈ 214 hp160 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Line
- LS Series CE
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | ≈ 1,147.7 cfm | ≈ 32.5 m³/min |
| 8 bar (≈ 116 psig) | ≈ 1,077.1 cfm | ≈ 30.5 m³/min |
| 10 bar (≈ 145 psig) | ≈ 964.1 cfm | ≈ 27.3 m³/min |
| 12.5 bar (≈ 181 psig) | ≈ 766.3 cfm | ≈ 21.7 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI K-MAX TS 160-08 VS | 385 to 1,165 cfm | 8 bar (≈ 116 psig) | ≈ 214 hp | Europe / international |
| ALUP ALLEGRO 200 | 362 to 1,210 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
| ELGi EG 160SP (VSD) | 452 to 1,130 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Kaeser DSDX 305 SFC | ≈ 241.9 to 1,166.4 cfm | 7.5 bar (≈ 109 psig) | ≈ 214 hp | Worldwide |
| Atlas Copco GA 160 VSD+ 8.5 bar (125 psi) | 214 to 1,176 cfm | 100 psig (≈ 6.9 bar) | 215 hp | Worldwide |
| Sullivan-Palatek SP25-250 VFD | 1,267.7 acfm | 100 psig (≈ 6.9 bar) | 250 hp | North America |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series CE models
Is your product missing?
Request received. We will proceed within 72 hours.