Lubricated rotary screw compressor
Sullair LS132 (CE)
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 960.6 cfm7 bar (≈ 102 psig)
- Power
- ≈ 177 hp132 kW
- Type
- Fixed speed
- Manufacturer
- Sullair
- Line
- LS Series CE
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | ≈ 960.6 cfm | ≈ 27.2 m³/min |
| 8 bar (≈ 116 psig) | ≈ 893.5 cfm | ≈ 25.3 m³/min |
| 10 bar (≈ 145 psig) | ≈ 812.2 cfm | ≈ 23 m³/min |
| 12.5 bar (≈ 181 psig) | ≈ 685.1 cfm | ≈ 19.4 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 132SP | 963 cfm | 7 bar (≈ 102 psig) | 200 hp | Worldwide |
| Atlas Copco GA 132 | 945 cfm | 100 psig (≈ 6.9 bar) | 175 hp | Worldwide |
| Kaeser DSD 240 | ≈ 888.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 177 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 1,038.9 acfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Gardner Denver L132 | 834.9 acfm | 110 psig (≈ 7.6 bar) | 180 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series CE models
Is your product missing?
Request received. We will proceed within 72 hours.