Lubricated rotary screw compressor
Atlas Copco GA 132
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 945 cfm100 psig (≈ 6.9 bar)
- Power
- 175 hp132 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA 90+-160
- Stages
- n/a
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 73 psig (≈ 5 bar) | 1,070 cfm | ≈ 30.3 m³/min |
| 100 psig (≈ 6.9 bar) | 945 cfm | ≈ 26.76 m³/min |
| 125 psig (≈ 8.6 bar) | 848 cfm | ≈ 24.01 m³/min |
| 150 psig (≈ 10.3 bar) | 750 cfm | ≈ 21.24 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 5 bar (≈ 73 psig) | 1,064 cfm | ≈ 30.13 m³/min |
| 7 bar (≈ 102 psig) | 932 cfm | ≈ 26.39 m³/min |
| 8 bar (≈ 116 psig) | 877 cfm | ≈ 24.83 m³/min |
| 9.5 bar (≈ 138 psig) | 809 cfm | ≈ 22.91 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 132P | 936 cfm | 7 bar (≈ 102 psig) | 175 hp | Worldwide |
| Kaeser DSD 240 | ≈ 888.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 177 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 1,038.9 acfm | 100 psig (≈ 6.9 bar) | 200 hp | North America |
| Gardner Denver L132 | 834.9 acfm | 110 psig (≈ 7.6 bar) | 180 hp | Worldwide |
| Sullair LS132 (CE) | ≈ 960.6 cfm | 7 bar (≈ 102 psig) | ≈ 177 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA 90+-160 models
Is your product missing?
Request received. We will proceed within 72 hours.