Lubricated rotary screw compressor
Kaeser SFC 132
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,016 cfm110 psig (≈ 7.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Kaeser
- Line
- SFC
- Stages
- 1
- Cooling
- Air
- Voltage
- 460 V (data); 575 V consult Kaeser
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,016 cfm | ≈ 28.77 m³/min |
| 125 psig (≈ 8.6 bar) | 951 cfm | ≈ 26.93 m³/min |
| 145 psig (≈ 10 bar) | 846 cfm | ≈ 23.96 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 160P (VSD) | 444 to 1,016 cfm | 8 bar (≈ 116 psig) | 200 hp | Worldwide |
| Sullair LS160V | 1,025 cfm | 110 psig (≈ 7.6 bar) | 200 hp | North America |
| Atlas Copco GA 160 VSD+ 8.5 bar (125 psi) | 208 to 1,049 cfm | 132 psig (≈ 9.1 bar) | 215 hp | Worldwide |
| Sullivan-Palatek SP25-250 VFD | 1,129.1 acfm | 125 psig (≈ 8.6 bar) | 250 hp | North America |
| FINI K-MAX TS 132-08 VS | 315 to 953 cfm | 8 bar (≈ 116 psig) | ≈ 177 hp | Europe / international |
| ALUP ALLEGRO 200 | 352 to 1,170 cfm | 8 bar (≈ 116 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SFC models
Is your product missing?
Request received. We will proceed within 72 hours.