Lubricated rotary screw compressor
Gardner Denver L22
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 125.7 acfm110 psig (≈ 7.6 bar)
- Power
- 30 hp22 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 125.7 acfm | ≈ 3.56 m³/min |
| 130 psig (≈ 9 bar) | 117.2 acfm | ≈ 3.32 m³/min |
| 190 psig (≈ 13.1 bar) | 92.3 acfm | ≈ 2.61 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Ingersoll Rand RSb18ie | 124 cfm | 7.5 bar (≈ 109 psig) | ≈ 24 hp | Worldwide |
| Kaeser ASK 34 | ≈ 124 cfm | 7.5 bar (≈ 109 psig) | ≈ 25 hp | Worldwide |
| Hertz Kompressoren HSC 22 | ≈ 121.8 cfm | 7.5 bar (≈ 109 psig) | 30 hp | Worldwide |
| ELGi EG 18 | 114 cfm | 8 bar (≈ 116 psig) | 25 hp | Worldwide |
| Quincy QGS-30 | 113.8 cfm | 125 psig (≈ 8.6 bar) | 30 hp | North America |
| Champion D30 | 111.8 cfm | 125 psig (≈ 8.6 bar) | 30 hp | North America |
| Sullair ST22 (CE) | ≈ 125.4 cfm | 8 bar (≈ 116 psig) | ≈ 29 hp | Europe / international |
| ABAC SPINN 22 8 | ≈ 126.1 cfm | 8 bar (≈ 116 psig) | 30 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.