Lubricated rotary screw compressor
Champion D30
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 111.8 cfm125 psig (≈ 8.6 bar)
- Power
- 30 hp≈ 22.4 kW
- Type
- Fixed speed
- Manufacturer
- Champion
- Line
- D5–D30
- Stages
- 1
- Cooling
- Air
- Voltage
- 200/230/460 V 3ph
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 111.8 cfm | ≈ 3.17 m³/min |
| 145 psig (≈ 10 bar) | 103.3 cfm | ≈ 2.93 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser ASD 25 | 111 cfm | 125 psig (≈ 8.6 bar) | 25 hp | North America |
| Quincy QGS-30 | 113.8 cfm | 125 psig (≈ 8.6 bar) | 30 hp | North America |
| Hertz Kompressoren HSC 22 | ≈ 109.1 cfm | 8.5 bar (≈ 123 psig) | 30 hp | Worldwide |
| Chicago Pneumatic CPBg 29 | 116 cfm | 9.5 bar (≈ 138 psig) | 30 hp | Worldwide |
| Ingersoll Rand RSb18ie | 117 cfm | 8.5 bar (≈ 123 psig) | ≈ 24 hp | Worldwide |
| Gardner Denver L22 | 117.2 acfm | 130 psig (≈ 9 bar) | 30 hp | Worldwide |
| ELGi EG 22 | 118 cfm | 9.5 bar (≈ 138 psig) | 30 hp | Worldwide |
| Atlas Copco GA 18 FLX | 123.1 cfm | 147 psig (≈ 10.1 bar) | 25 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5–D30 models
Is your product missing?
Request received. We will proceed within 72 hours.