Lubricated rotary screw compressor
Atlas Copco GA 18 FLX
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 140.7 cfm102 psig (≈ 7 bar)
- Power
- 25 hp18 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA FLX
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 58 psig (≈ 4 bar) | 141.5 cfm | ≈ 4.01 m³/min |
| 102 psig (≈ 7 bar) | 140.7 cfm | ≈ 3.98 m³/min |
| 147 psig (≈ 10.1 bar) | 123.1 cfm | ≈ 3.49 m³/min |
| 181 psig (≈ 12.5 bar) | 99.4 cfm | ≈ 2.81 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Sullair 2200 (60 Hz) | 140 cfm | 100 psig (≈ 6.9 bar) | 30 hp | North America |
| ELGi EG 22 | 142 cfm | 7 bar (≈ 102 psig) | 30 hp | Worldwide |
| Kaeser ASD 40 | ≈ 138.4 cfm | 7.5 bar (≈ 109 psig) | ≈ 29 hp | Worldwide |
| Ingersoll Rand RSb22ie | 145 cfm | 7.5 bar (≈ 109 psig) | ≈ 29 hp | Worldwide |
| Chicago Pneumatic CPBg 29 | 136 cfm | 7 bar (≈ 102 psig) | 30 hp | Worldwide |
| Gardner Denver L23 | 148.7 acfm | 100 psig (≈ 6.9 bar) | 30 hp | Worldwide |
| Hertz Kompressoren HSC 22 | ≈ 121.8 cfm | 7.5 bar (≈ 109 psig) | 30 hp | Worldwide |
| Mark MSM 22 | 131 cfm | 8 bar (≈ 116 psig) | 30 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA FLX models
Is your product missing?
Request received. We will proceed within 72 hours.