Lubricated rotary screw compressor
Atlas Copco GA 11 FLX
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 75.4 cfm102 psig (≈ 7 bar)
- Power
- 15 hp11 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA FLX
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 58 psig (≈ 4 bar) | 75.6 cfm | ≈ 2.14 m³/min |
| 102 psig (≈ 7 bar) | 75.4 cfm | ≈ 2.14 m³/min |
| 147 psig (≈ 10.1 bar) | 67.2 cfm | ≈ 1.9 m³/min |
| 181 psig (≈ 12.5 bar) | 55.3 cfm | ≈ 1.57 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SK 22 | ≈ 71.3 cfm | 7.5 bar (≈ 109 psig) | ≈ 15 hp | Worldwide |
| Hertz Kompressoren HGS 15 | ≈ 79.8 cfm | 7.5 bar (≈ 109 psig) | 20 hp | Worldwide |
| ELGi EG 11 | 71 cfm | 7 bar (≈ 102 psig) | 15 hp | Worldwide |
| Champion DRS 20 | 66.3 cfm | 100 psig (≈ 6.9 bar) | 20 hp | North America |
| Gardner Denver L15 | 87.2 acfm | 110 psig (≈ 7.6 bar) | 20 hp | Worldwide |
| FINI PLUS 15-08 | 76 cfm | 8 bar (≈ 116 psig) | 20 hp | Europe / international |
| Chicago Pneumatic CPM 20 | 79 cfm | 0.7 MPa (≈ 102 psig) | 20 hp | Europe / international |
| Sullair ST15 (CE) | ≈ 80.5 cfm | 8 bar (≈ 116 psig) | ≈ 20 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA FLX models
Is your product missing?
Request received. We will proceed within 72 hours.