Lubricated rotary screw compressor
Atlas Copco GA 22 FLX
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 162.5 cfm102 psig (≈ 7 bar)
- Power
- 30 hp22 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA FLX
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 58 psig (≈ 4 bar) | 163.4 cfm | ≈ 4.63 m³/min |
| 102 psig (≈ 7 bar) | 162.5 cfm | ≈ 4.6 m³/min |
| 147 psig (≈ 10.1 bar) | 144.3 cfm | ≈ 4.09 m³/min |
| 181 psig (≈ 12.5 bar) | 119.1 cfm | ≈ 3.37 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser ASD 50 | ≈ 161.7 cfm | 7.5 bar (≈ 109 psig) | ≈ 34 hp | Worldwide |
| Sullair ST3008 | 160 cfm | 115 psig (≈ 7.9 bar) | 40 hp | North America |
| Gardner Denver L26 | 172.8 acfm | 100 psig (≈ 6.9 bar) | 35 hp | Worldwide |
| Chicago Pneumatic CPBg 34 | 149 cfm | 7 bar (≈ 102 psig) | 35 hp | Worldwide |
| ELGi EG 26 | 177 cfm | 7 bar (≈ 102 psig) | 35 hp | Worldwide |
| Ingersoll Rand RSb22ie | 145 cfm | 7.5 bar (≈ 109 psig) | ≈ 29 hp | Worldwide |
| Hertz Kompressoren HSC 30 | ≈ 191.4 cfm | 7.5 bar (≈ 109 psig) | 40 hp | Worldwide |
| FINI PLUS 31-08 | 166 cfm | 8 bar (≈ 116 psig) | 40 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA FLX models
Is your product missing?
Request received. We will proceed within 72 hours.