Lubricated rotary screw compressor
Atlas Copco GA 30 FLX
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 212.1 cfm102 psig (≈ 7 bar)
- Power
- 40 hp30 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA FLX
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 58 psig (≈ 4 bar) | 212.9 cfm | ≈ 6.03 m³/min |
| 102 psig (≈ 7 bar) | 212.1 cfm | ≈ 6.01 m³/min |
| 147 psig (≈ 10.1 bar) | 189.6 cfm | ≈ 5.37 m³/min |
| 181 psig (≈ 12.5 bar) | 160.6 cfm | ≈ 4.55 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 30 | 206 cfm | 7 bar (≈ 102 psig) | 40 hp | Worldwide |
| Sullair ST3708 | 219 cfm | 115 psig (≈ 7.9 bar) | 50 hp | North America |
| Kaeser BSD 65 | ≈ 199.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 40 hp | Worldwide |
| Gardner Denver L30 | 196.9 acfm | 110 psig (≈ 7.6 bar) | 40 hp | Worldwide |
| Hertz Kompressoren HSC 37 | ≈ 229.5 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Worldwide |
| FINI PLUS 38-08 | 212 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Europe / international |
| Chicago Pneumatic CPD 40 G | 198 cfm | 0.7 MPa (≈ 102 psig) | 40 hp | Europe / international |
| ABAC FORMULA M37 7,5 | ≈ 233.1 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA FLX models
Is your product missing?
Request received. We will proceed within 72 hours.