Lubricated rotary screw compressor
Atlas Copco GA 15 FLX
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 104.5 cfm102 psig (≈ 7 bar)
- Power
- 20 hp15 kW
- Type
- Fixed speed
- Manufacturer
- Atlas Copco
- Line
- GA FLX
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 58 psig (≈ 4 bar) | 105.3 cfm | ≈ 2.98 m³/min |
| 102 psig (≈ 7 bar) | 104.5 cfm | ≈ 2.96 m³/min |
| 147 psig (≈ 10.1 bar) | 89.2 cfm | ≈ 2.53 m³/min |
| 181 psig (≈ 12.5 bar) | 69.5 cfm | ≈ 1.97 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Champion DRS 30 | 104.8 cfm | 100 psig (≈ 6.9 bar) | 30 hp | North America |
| Ingersoll Rand RSb15ie | 104 cfm | 7.5 bar (≈ 109 psig) | ≈ 20 hp | Worldwide |
| Hertz Kompressoren HSC 18,5 | ≈ 103.1 cfm | 7.5 bar (≈ 109 psig) | 25 hp | Worldwide |
| Sullair ST1808 | 103 cfm | 115 psig (≈ 7.9 bar) | 25 hp | North America |
| Kaeser ASK 28 | ≈ 101 cfm | 7.5 bar (≈ 109 psig) | ≈ 20 hp | Worldwide |
| Gardner Denver L18 | 110.2 acfm | 110 psig (≈ 7.6 bar) | 25 hp | Worldwide |
| ELGi EG 15 | 98 cfm | 7 bar (≈ 102 psig) | 20 hp | Worldwide |
| ABAC SPINN 18 8 | ≈ 105.9 cfm | 8 bar (≈ 116 psig) | 25 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other GA FLX models
Is your product missing?
Request received. We will proceed within 72 hours.