Lubricated rotary screw compressor

FINI PLUS 38-08

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 212 cfm7.5 bar (≈ 109 psig)
Power: 50 hp37 kW
Type: Fixed speed
Manufacturer: FINI
Line: MICRO / PLUS 2.2-75 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
7.5 bar (≈ 109 psig)	212 cfm	≈ 6 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
PLUS 38-08	V60BK92FNMA60	n/a	n/a
PLUS 38-08 ES	V60BK92FNMB60	with dryer	n/a

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ABAC FORMULA M37 8,5	≈ 215.1 cfm	8.5 bar (≈ 123 psig)	50 hp	Europe / international
Chicago Pneumatic CPM 50	222 cfm	0.8 MPa (≈ 116 psig)	50 hp	Europe / international
Sullair ST3708	219 cfm	115 psig (≈ 7.9 bar)	50 hp	North America
Quincy QGS-50C	203.1 cfm	125 psig (≈ 8.6 bar)	50 hp	North America
Kaeser BSD 65	≈ 199.5 cfm	7.5 bar (≈ 109 psig)	≈ 40 hp	Worldwide
Gardner Denver L30	196.9 acfm	110 psig (≈ 7.6 bar)	40 hp	Worldwide
Atlas Copco GA 37	228 cfm	125 psig (≈ 8.6 bar)	50 hp	Worldwide
Hertz Kompressoren HSC 37	≈ 229.5 cfm	7.5 bar (≈ 109 psig)	50 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?