Lubricated rotary screw compressor
Chicago Pneumatic CPM 50
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 233 cfm0.7 MPa (≈ 102 psig)
- Power
- 50 hp37 kW
- Type
- Fixed speed
- Manufacturer
- Chicago Pneumatic
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 0.7 MPa (≈ 102 psig) | 233 cfm | ≈ 6.6 m³/min |
| 0.8 MPa (≈ 116 psig) | 222 cfm | ≈ 6.29 m³/min |
| 1 MPa (≈ 145 psig) | 180 cfm | ≈ 5.1 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI K-MAX 38-08 | 233 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Europe / international |
| ABAC FORMULA M37 7,5 | ≈ 233.1 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Europe / international |
| Sullair ST37 (CE) | ≈ 222.5 cfm | 8 bar (≈ 116 psig) | ≈ 50 hp | Europe / international |
| Gardner Denver L37 | 233.7 acfm | 110 psig (≈ 7.6 bar) | 50 hp | Worldwide |
| Hertz Kompressoren HSC 37 | ≈ 229.5 cfm | 7.5 bar (≈ 109 psig) | 50 hp | Worldwide |
| Kaeser BSD 75 | ≈ 247.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 50 hp | Worldwide |
| Atlas Copco GA 37 | 249 cfm | 100 psig (≈ 6.9 bar) | 50 hp | Worldwide |
| ELGi EG 37 | 255 cfm | 7 bar (≈ 102 psig) | 50 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CPM 5.5-50 / CPD 40-50 G models
Is your product missing?
Request received. We will proceed within 72 hours.