Lubricated rotary screw compressor
Chicago Pneumatic CPM 25
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 107 cfm0.7 MPa (≈ 102 psig)
- Power
- 25 hp18.5 kW
- Type
- Fixed speed
- Manufacturer
- Chicago Pneumatic
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 0.7 MPa (≈ 102 psig) | 107 cfm | ≈ 3.03 m³/min |
| 0.8 MPa (≈ 116 psig) | 106 cfm | ≈ 3 m³/min |
| 1 MPa (≈ 145 psig) | 91 cfm | ≈ 2.58 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ABAC SPINN 18 8 | ≈ 105.9 cfm | 8 bar (≈ 116 psig) | 25 hp | Europe / international |
| Mark MSM 18 | 110 cfm | 8 bar (≈ 116 psig) | 25 hp | Europe / international |
| CompAir L18 | ≈ 114.8 cfm | 7.5 bar (≈ 109 psig) | ≈ 25 hp | Europe / international |
| FINI PLUS 18.5-08 | 99 cfm | 8 bar (≈ 116 psig) | 25 hp | Europe / international |
| Sullair 1800 (50 Hz) | 109 cfm | 100 psig (≈ 6.9 bar) | 25 hp | North America |
| Champion DRS 30 | 104.8 cfm | 100 psig (≈ 6.9 bar) | 30 hp | North America |
| Atlas Copco GA 15 FLX | 104.5 cfm | 102 psig (≈ 7 bar) | 20 hp | Worldwide |
| Ingersoll Rand RSb15ie | 104 cfm | 7.5 bar (≈ 109 psig) | ≈ 20 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CPM 5.5-50 / CPD 40-50 G models
Is your product missing?
Request received. We will proceed within 72 hours.