Lubricated rotary screw compressor
Chicago Pneumatic CPM 5.5
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 20 cfm0.8 MPa (≈ 116 psig)
- Power
- 5.5 hp4 kW
- Type
- Fixed speed
- Manufacturer
- Chicago Pneumatic
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 0.8 MPa (≈ 116 psig) | 20 cfm | ≈ 0.57 m³/min |
| 1 MPa (≈ 145 psig) | 18 cfm | ≈ 0.51 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI MICRO SE 4.0-08 | 20 cfm | 8 bar (≈ 116 psig) | 5.5 hp | Europe / international |
| Sullair ST4 (CE) | ≈ 20.5 cfm | 8 bar (≈ 116 psig) | ≈ 5 hp | Europe / international |
| ABAC SPINN4 8 | ≈ 21.2 cfm | 8 bar (≈ 116 psig) | 5.5 hp | Europe / international |
| Kaeser SX 5 | 21.2 cfm | 125 psig (≈ 8.6 bar) | 5 hp | North America |
| Gardner Denver L04 | 18.2 acfm | 125 psig (≈ 8.6 bar) | 5 hp | Worldwide |
| Hertz Kompressoren HGS 4 | ≈ 17.7 cfm | 8.5 bar (≈ 123 psig) | 5.5 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CPM 5.5-50 / CPD 40-50 G models
Is your product missing?
Request received. We will proceed within 72 hours.