Lubricated rotary screw compressor
Kaeser SX 5
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 21.2 cfm125 psig (≈ 8.6 bar)
- Power
- 5 hp≈ 3.7 kW
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- SX
- Stages
- 1
- Cooling
- Air
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 21.2 cfm | ≈ 0.6 m³/min |
| 160 psig (≈ 11 bar) | 17 cfm | ≈ 0.48 m³/min |
| 217 psig (≈ 15 bar) | 12.7 cfm | ≈ 0.36 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Hertz Kompressoren HGS 5,5 | ≈ 23.3 cfm | 8.5 bar (≈ 123 psig) | 7.5 hp | Worldwide |
| Gardner Denver L04 | 18.2 acfm | 125 psig (≈ 8.6 bar) | 5 hp | Worldwide |
| Quincy QGS-7.5 | 25.3 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| FINI MICRO 5.5-10 | 23 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Chicago Pneumatic CPM 7.5 | 24 cfm | 1 MPa (≈ 145 psig) | 7.5 hp | Europe / international |
| ABAC SPINN4 10 | ≈ 18.2 cfm | 10 bar (≈ 145 psig) | 5.5 hp | Europe / international |
| Sullair ST4 (CE) | ≈ 17.7 cfm | 10 bar (≈ 145 psig) | ≈ 5 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SX models
Is your product missing?
Request received. We will proceed within 72 hours.