Lubricated rotary screw compressor
Kaeser SX 7.5
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 28.3 cfm125 psig (≈ 8.6 bar)
- Power
- 7.5 hp≈ 5.6 kW
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- SX
- Stages
- 1
- Cooling
- Air
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 28.3 cfm | ≈ 0.8 m³/min |
| 160 psig (≈ 11 bar) | 23.7 cfm | ≈ 0.67 m³/min |
| 217 psig (≈ 15 bar) | 18.7 cfm | ≈ 0.53 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Champion D7.5 | 28 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| Quincy QGS-7.5 | 25.3 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| Gardner Denver L05 | 24.9 acfm | 125 psig (≈ 8.6 bar) | 7.5 hp | Worldwide |
| Hertz Kompressoren HGS 5,5 | ≈ 23.3 cfm | 8.5 bar (≈ 123 psig) | 7.5 hp | Worldwide |
| ABAC SPINN5,5 10 | ≈ 27.5 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Sullair ST5 (CE) | ≈ 26.5 cfm | 10 bar (≈ 145 psig) | ≈ 7 hp | Europe / international |
| FINI K-MAX 5.5-10 | 25 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Chicago Pneumatic CPM 10 | 32 cfm | 1 MPa (≈ 145 psig) | 10 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SX models
Is your product missing?
Request received. We will proceed within 72 hours.