Lubricated rotary screw compressor
Champion D7.5
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 28 cfm145 psig (≈ 10 bar)
- Power
- 7.5 hp≈ 5.6 kW
- Type
- Fixed speed
- Manufacturer
- Champion
- Line
- D5–D30
- Stages
- 1
- Cooling
- Air
- Voltage
- 230 V 1ph
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 145 psig (≈ 10 bar) | 28 cfm | ≈ 0.79 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SM 10 | ≈ 27.5 cfm | 10 bar (≈ 145 psig) | ≈ 7 hp | Worldwide |
| Hertz Kompressoren HGS 7,5 | ≈ 30.7 cfm | 10 bar (≈ 145 psig) | 10 hp | Worldwide |
| Quincy QGS-7.5 | 25.3 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| ABAC SPINN5,5 10 | ≈ 27.5 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Sullair ST5 (CE) | ≈ 26.5 cfm | 10 bar (≈ 145 psig) | ≈ 7 hp | Europe / international |
| FINI K-MAX 5.5-10 | 25 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Chicago Pneumatic CPM 7.5 | 24 cfm | 1 MPa (≈ 145 psig) | 7.5 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5–D30 models
Is your product missing?
Request received. We will proceed within 72 hours.