Lubricated rotary screw compressor
Champion D20
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 75.5 cfm125 psig (≈ 8.6 bar)
- Power
- 20 hp≈ 14.9 kW
- Type
- Fixed speed
- Manufacturer
- Champion
- Line
- D5–D30
- Stages
- 1
- Cooling
- Air
- Voltage
- 200/230/460 V 3ph
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 75.5 cfm | ≈ 2.14 m³/min |
| 145 psig (≈ 10 bar) | 65.7 cfm | ≈ 1.86 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser SK 25 | ≈ 74.9 cfm | 10 bar (≈ 145 psig) | ≈ 20 hp | Worldwide |
| Hertz Kompressoren HGS 15 | ≈ 77 cfm | 8.5 bar (≈ 123 psig) | 20 hp | Worldwide |
| Chicago Pneumatic CPBg 20 | 80 cfm | 9.5 bar (≈ 138 psig) | 20 hp | Worldwide |
| ELGi EG 15 | 80 cfm | 9.5 bar (≈ 138 psig) | 20 hp | Worldwide |
| Gardner Denver L15 | 80.8 acfm | 130 psig (≈ 9 bar) | 20 hp | Worldwide |
| Quincy QGS-20 | 82.2 cfm | 125 psig (≈ 8.6 bar) | 20 hp | North America |
| Atlas Copco GA 11 FLX | 67.2 cfm | 147 psig (≈ 10.1 bar) | 15 hp | Worldwide |
| ABAC FORMULA 15 10 | ≈ 74.5 cfm | 10 bar (≈ 145 psig) | 20 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5–D30 models
Is your product missing?
Request received. We will proceed within 72 hours.