Lubricated rotary screw compressor

ABAC SPINN 15 10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 59.3 cfm10 bar (≈ 145 psig)
Power: 20 hp15 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	≈ 59.3 cfm	≈ 1.68 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 15 10 400/50 FM CE	4152022546	Base-mounted	400 V 3ph
SPINN 15 10 400/50 TM270 CE	4152022634	Tank-mounted 270 L	400 V 3ph
SPINN 15 10 400/50 TM500 CE	4152022636	Tank-mounted 500 L	400 V 3ph
SPINN 15E 10 400/50 TM270 CE	4152022653	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 15E 10 400/50 TM500 CE	4152022655	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
FINI K-MAX 11-10	55 cfm	10 bar (≈ 145 psig)	15 hp	Europe / international
Sullair ST11 (CE)	≈ 54.7 cfm	10 bar (≈ 145 psig)	≈ 15 hp	Europe / international
Chicago Pneumatic CPM 20	70 cfm	1 MPa (≈ 145 psig)	20 hp	Europe / international
Kaeser SK 22	≈ 59.3 cfm	10 bar (≈ 145 psig)	≈ 15 hp	Worldwide
Champion D20	65.7 cfm	145 psig (≈ 10 bar)	20 hp	North America
Atlas Copco GA 11 FLX	67.2 cfm	147 psig (≈ 10.1 bar)	15 hp	Worldwide
Hertz Kompressoren HGS 11	≈ 47.7 cfm	10 bar (≈ 145 psig)	15 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?