Lubricated rotary screw compressor

ABAC SPINN 7.5X 8

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 40.3 cfm8 bar (≈ 116 psig)
Power: 10 hp7.5 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	≈ 40.3 cfm	≈ 1.14 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 7.5X 8 400/50 FM CE	4152022539	Base-mounted	400 V 3ph
SPINN 7.5X 8 400/50 TM270 CE	4152022623	Tank-mounted 270 L	400 V 3ph
SPINN 7.5X 8 400/50 TM500 CE	4152022625	Tank-mounted 500 L	400 V 3ph
SPINN 7.5XE 8 400/50 TM270 CE	4152022642	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 7.5XE 8 400/50 TM500 CE	4152022644	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Chicago Pneumatic CPM 10	40 cfm	0.8 MPa (≈ 116 psig)	10 hp	Europe / international
Sullair ST7 (CE)	≈ 37.8 cfm	8 bar (≈ 116 psig)	≈ 9 hp	Europe / international
FINI PLUS 8-08	44 cfm	8 bar (≈ 116 psig)	10 hp	Europe / international
Quincy QGS-10	38.8 cfm	125 psig (≈ 8.6 bar)	10 hp	North America
Gardner Denver L07	38.7 acfm	125 psig (≈ 8.6 bar)	10 hp	Worldwide
Kaeser SM 10	45.1 cfm	125 psig (≈ 8.6 bar)	10 hp	North America
Hertz Kompressoren HGS 7,5	≈ 35.3 cfm	8.5 bar (≈ 123 psig)	10 hp	Worldwide
Champion DRS 10	34 cfm	135 psig (≈ 9.3 bar)	10 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?