Lubricated rotary screw compressor

ABAC SPINN 15 8

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 65.7 cfm8 bar (≈ 116 psig)
Power: 20 hp15 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	≈ 65.7 cfm	≈ 1.86 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 15 8 400/50 FM CE	4152022545	Base-mounted	400 V 3ph
SPINN 15 8 400/50 TM270 CE	4152022633	Tank-mounted 270 L	400 V 3ph
SPINN 15 8 400/50 TM500 CE	4152022635	Tank-mounted 500 L	400 V 3ph
SPINN 15E 8 400/50 TM270 CE	4152022652	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 15E 8 400/50 TM500 CE	4152022654	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair ST11 (CE)	≈ 63.6 cfm	8 bar (≈ 116 psig)	≈ 15 hp	Europe / international
Chicago Pneumatic CPM 15	63 cfm	0.8 MPa (≈ 116 psig)	15 hp	Europe / international
FINI K-MAX 11-08	60 cfm	8 bar (≈ 116 psig)	15 hp	Europe / international
Champion DRS 20	65 cfm	135 psig (≈ 9.3 bar)	20 hp	North America
ELGi EG 11	64 cfm	8 bar (≈ 116 psig)	15 hp	Worldwide
Kaeser SK 15	69.7 cfm	125 psig (≈ 8.6 bar)	15 hp	North America
Quincy QGS-20S	60.9 cfm	125 psig (≈ 8.6 bar)	20 hp	North America
Gardner Denver L11	57.9 acfm	125 psig (≈ 8.6 bar)	15 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?