Lubricated rotary screw compressor

ABAC SPINN 11 10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 50 cfm10 bar (≈ 145 psig)
Power: 15 hp11 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	≈ 50 cfm	≈ 1.42 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 11 10 400/50 FM CE	4152022543	Base-mounted	400 V 3ph
SPINN 11 10 400/50 TM270 CE	4152022629	Tank-mounted 270 L	400 V 3ph
SPINN 11 10 400/50 TM500 CE	4152022631	Tank-mounted 500 L	400 V 3ph
SPINN 11E 10 400/50 TM270 CE	4152022648	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 11E 10 400/50 TM500 CE	4152022650	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Chicago Pneumatic CPM 15	48 cfm	1 MPa (≈ 145 psig)	15 hp	Europe / international
FINI PLUS 11-10	53 cfm	10 bar (≈ 145 psig)	15 hp	Europe / international
Sullair ST11 (CE)	≈ 54.7 cfm	10 bar (≈ 145 psig)	≈ 15 hp	Europe / international
Champion D15	50.3 cfm	145 psig (≈ 10 bar)	15 hp	North America
Kaeser SM 16	≈ 48.4 cfm	10 bar (≈ 145 psig)	≈ 12 hp	Worldwide
Hertz Kompressoren HGS 11	≈ 47.7 cfm	10 bar (≈ 145 psig)	15 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?