Lubricated rotary screw compressor

ABAC SPINN 5.5X 8

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 29.9 cfm8 bar (≈ 116 psig)
Power: 7.5 hp5.5 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	≈ 29.9 cfm	≈ 0.85 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 5.5X 8 400/50 FM CE	4152022537	Base-mounted	400 V 3ph
SPINN 5.5X 8 400/50 TM270 CE	4152022619	Tank-mounted 270 L	400 V 3ph
SPINN 5.5X 8 400/50 TM500 CE	4152022621	Tank-mounted 500 L	400 V 3ph
SPINN 5.5XE 8 400/50 TM270 CE	4152022638	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 5.5XE 8 400/50 TM500 CE	4152022640	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair ST5 (CE)	≈ 29.3 cfm	8 bar (≈ 116 psig)	≈ 7 hp	Europe / international
Chicago Pneumatic CPM 7.5	29 cfm	0.8 MPa (≈ 116 psig)	7.5 hp	Europe / international
FINI MICRO 5.5-08	25 cfm	8 bar (≈ 116 psig)	7.5 hp	Europe / international
Kaeser SX 7.5	28.3 cfm	125 psig (≈ 8.6 bar)	7.5 hp	North America
Champion DRS 10	34 cfm	135 psig (≈ 9.3 bar)	10 hp	North America
Gardner Denver L05	24.9 acfm	125 psig (≈ 8.6 bar)	7.5 hp	Worldwide
Hertz Kompressoren HGS 7,5	≈ 35.3 cfm	8.5 bar (≈ 123 psig)	10 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?