Lubricated rotary screw compressor
ABAC SPINN 7.5X 13
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 27.5 cfm13 bar (≈ 189 psig)
- Power
- 10 hp7.5 kW
- Type
- Fixed speed
- Manufacturer
- ABAC
- Line
- SPINN 5.5x-15 kW
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 13 bar (≈ 189 psig) | ≈ 27.5 cfm | ≈ 0.78 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| SPINN 7.5X 13 400/50 FM CE | 4152022541 | Base-mounted | 400 V 3ph |
| SPINN 7.5X 13 400/50 TM500 CE | 4152022627 | Tank-mounted 500 L | 400 V 3ph |
| SPINN 7.5XE 13 400/50 TM500 CE | 4152022646 | Tank-mounted 500 L, with dryer | 400 V 3ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI PLUS 8-13 | 26 cfm | 13 bar (≈ 189 psig) | 10 hp | Europe / international |
| Kaeser SM 10 | 28.2 cfm | 217 psig (≈ 15 bar) | 10 hp | North America |
| Gardner Denver L07 | 28.8 acfm | 190 psig (≈ 13.1 bar) | 10 hp | Worldwide |
| Hertz Kompressoren HGS 7,5 | ≈ 22.6 cfm | 13 bar (≈ 189 psig) | 10 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPINN 5.5x-15 kW models
Is your product missing?
Request received. We will proceed within 72 hours.