Lubricated rotary screw compressor

ABAC SPINN 5.5X 10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 24.6 cfm10 bar (≈ 145 psig)
Power: 7.5 hp5.5 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	≈ 24.6 cfm	≈ 0.7 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 5.5X 10 400/50 FM CE	4152022538	Base-mounted	400 V 3ph
SPINN 5.5X 10 400/50 TM270 CE	4152022620	Tank-mounted 270 L	400 V 3ph
SPINN 5.5X 10 400/50 TM500 CE	4152022622	Tank-mounted 500 L	400 V 3ph
SPINN 5.5XE 10 400/50 TM270 CE	4152022639	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 5.5XE 10 400/50 TM500 CE	4152022641	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
FINI CUBE 5.5-10	24.9 cfm	10 bar (≈ 145 psig)	7.5 hp	Europe / international
Chicago Pneumatic CPM 7.5	24 cfm	1 MPa (≈ 145 psig)	7.5 hp	Europe / international
Kaeser SX 8	≈ 24 cfm	10 bar (≈ 145 psig)	≈ 7 hp	Worldwide
Quincy QGS-7.5	25.3 cfm	145 psig (≈ 10 bar)	7.5 hp	North America
Sullair ST510	25.3 cfm	150 psig (≈ 10.3 bar)	7.5 hp	North America
Champion D7.5	28 cfm	145 psig (≈ 10 bar)	7.5 hp	North America
Hertz Kompressoren HGS 5,5	≈ 19.8 cfm	10 bar (≈ 145 psig)	7.5 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?