Lubricated rotary screw compressor

ABAC SPINN 7.5X 10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 35.2 cfm10 bar (≈ 145 psig)
Power: 10 hp7.5 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 5.5x-15 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	≈ 35.2 cfm	≈ 1 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 7.5X 10 400/50 FM CE	4152022540	Base-mounted	400 V 3ph
SPINN 7.5X 10 400/50 TM270 CE	4152022624	Tank-mounted 270 L	400 V 3ph
SPINN 7.5X 10 400/50 TM500 CE	4152022626	Tank-mounted 500 L	400 V 3ph
SPINN 7.5XE 10 400/50 TM270 CE	4152022643	Tank-mounted 270 L, with dryer	400 V 3ph
SPINN 7.5XE 10 400/50 TM500 CE	4152022645	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
FINI PLUS 8-10	35 cfm	10 bar (≈ 145 psig)	10 hp	Europe / international
Sullair ST7 (CE)	≈ 35.7 cfm	10 bar (≈ 145 psig)	≈ 9 hp	Europe / international
Chicago Pneumatic CPM 10	32 cfm	1 MPa (≈ 145 psig)	10 hp	Europe / international
Kaeser SM 10	36.9 cfm	160 psig (≈ 11 bar)	10 hp	North America
Champion D10	31.7 cfm	145 psig (≈ 10 bar)	10 hp	North America
Hertz Kompressoren HGS 7,5	≈ 30.7 cfm	10 bar (≈ 145 psig)	10 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 5.5x-15 kW models

Is your product missing?