Lubricated rotary screw compressor
Kaeser SM 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 45.1 cfm125 psig (≈ 8.6 bar)
- Power
- 10 hp≈ 7.5 kW
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- SM
- Stages
- 1
- Cooling
- Air
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 45.1 cfm | ≈ 1.28 m³/min |
| 160 psig (≈ 11 bar) | 36.9 cfm | ≈ 1.04 m³/min |
| 217 psig (≈ 15 bar) | 28.2 cfm | ≈ 0.8 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Champion D15 | 50.3 cfm | 145 psig (≈ 10 bar) | 15 hp | North America |
| Quincy QGS-10 | 38.8 cfm | 125 psig (≈ 8.6 bar) | 10 hp | North America |
| Gardner Denver L07 | 38.7 acfm | 125 psig (≈ 8.6 bar) | 10 hp | Worldwide |
| Hertz Kompressoren HGS 11 | ≈ 53.3 cfm | 8.5 bar (≈ 123 psig) | 15 hp | Worldwide |
| Chicago Pneumatic CPM 15 | 48 cfm | 1 MPa (≈ 145 psig) | 15 hp | Europe / international |
| ABAC SPINN 11 10 | ≈ 50 cfm | 10 bar (≈ 145 psig) | 15 hp | Europe / international |
| FINI PLUS 11-10 | 53 cfm | 10 bar (≈ 145 psig) | 15 hp | Europe / international |
| Sullair ST7 (CE) | ≈ 35.7 cfm | 10 bar (≈ 145 psig) | ≈ 9 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SM models
Is your product missing?
Request received. We will proceed within 72 hours.